Iogear Cac Reader Mac

Iogear Cac Reader Drivers For Mac
Iogear Cac Reader Mac Installation
Iogear Cac Reader Driver For Mac
Iogear Cac Reader Mac
Iogear Cac Reader Mac Drivers
Iogear Cac Reader For Mac

The CAC reader also comes compatible with Windows, Mac, Linux Redhat, Ubuntu, and Fedora operating systems and features an attached USB Type-C cable making it easy to plug the device into both a USB Type-C port or Thunderbolt 3 port. IOGEAR's USB-C Common Access Card Reader requires the card to be inserted directly into the reader where.
Facilitate secure, authorized access to restricted systems with this IOGEAR USB-C smart card reader. Its reversible interface enables smooth connectivity to a compatible new-generation laptop and provides high-speed performance when authenticating CAC and PIV cards.
CAC Smart Card Reader, DOD Military USB Common Access Card Adapter for Military ID Card/IC Bank Chip Card Reader, USB Smart Card Writer for SIM Card Compatible with Windows XP/Vista/7/8/11, Mac OS 4.2 out of 5 stars 1,262.

NOTE:

Designed for government, military, healthcare, or banking use, the USB Type-C CAC Reader from IOGEAR provides secure access to restricted networks. This common access card reader comes equipped with dual LED indicators showing the power status and scan status when a card is inserted. The IOGEAR USB-C CAC Reader is a TAA compliant USB Common Access Card Reader for military, government and private sector workers who need everyday access to secure systems.

Between mid October 2019 and mid February 2020 everyone in the Army was migrated to use their PIV Authentication certificate for Email access. You no longer use the Email certificate for Enterprise Email or any CAC enabled websites

Mac users who choose to upgrade (or already have upgraded) to Mac OS Catalina (10.15.x) or Big Sur (11.xx.x) will need to uninstall all 3rd Party CAC enablers per https://militarycac.com/macuninstall.htm AND reenable the native smart card ability (very bottom of macuninstall link above)

If you purchased your Mac with OS Catalina (10.15.x) or Big Sur (11.xx.x) already installed, you can skip the uninstall part above and follow the instructions below.

6 'high level' steps needed, follow down the page to make this a painless systematic process

1.	Is your CAC reader 'Mac friendly'?
2.	Can your Mac 'see' the reader?
3.	Verify which version of Mac OS you have
4.	Figure out which CAC (ID card) you have
5.	Install the DoD certificates
5a.	Additional DoD certificate installation instructions for Firefox users
6.	Decide which CAC enabler you want to use (except for 10.12-.15 & 11)

Step 1: Is your CAC reader Mac friendly?

Visit the USB Readers page to verify the CAC reader you have is Mac friendly.

Visit the USB-C Readers page to verify the CAC reader you have is Mac friendly.

'Some, not all' CAC readers may need to have a driver installed to make it work.

NOTE: Readers such as: SCR-331 & SCR-3500A may need a firmware update (NO OTHER Readers need firmware updates).

Information about these specific readers are in Step 2

Step 2: Can your Mac 'see' the reader?

Plug the CAC reader into an open USB port before proceeding, give it a few moments to install

Step 2a: Click the Apple Icon in the upper left corner of the desktop, select 'About This Mac'

Step 2b: Click 'System Report...' (button)

Step 2c: Verify the CAC reader shows in Hardware, USB, under USB Device Tree. Different readers will show differently, most readers have no problem in this step. See Step 2c1 for specific reader issues.

Step 2c1: Verify firmware version on your SCR-331, SCR-3310 v2.0, GSR-202, 202V, 203, or SCR-3500a reader. If you have a reader other than these 6, Proceed directly to step 3

Step 2c1a-SCR-331 reader

If your reader does not look like this, go to the next step.

Step 2c1b-SCR-3310 v2.0 reader

If your reader does not look like this, go to the next step.

In the 'Hardware' drop down, click 'USB.' On the right side of the screen under 'USB Device Tree' the window will display all hardware plugged into the USB ports on your Mac. Look for “SCR3310 v2.0 USB Smart Card Reader.” If the Smart Card reader is present, look at 'Version' in the lower right corner of this box: If you have a number below 6.02, it will not read the 'G+D FIPS 201 SCE 7.0' CAC on Mac OS 11.xx.x or 10.15.7. I contacted HID (the company that makes these readers) on 14 DEC 2020 to find a way to update the firmware to 6.02. They said there is not firmware update for the reader. If your reader is older, you may need a new one. Please look at: https://militarycac.com/usbreaders.htm to find a compatible one. If you are already at version 6.02, your reader should work fine on your Mac and no further hardware changes are required. You can now Quit System Profiler and continue to Step 3.

Step 2c1c-SCR-3500A reader

If you have the SCR3500A P/N:905430-1 CAC reader,you may need to install this driver, as the one that installs automatically will not work on most Macs. Hold the control key [on your keyboard] when clicking the .pkg file [with your mouse], select [the word] Open

Step 3: Verify which version of MacOS you have?

(You need to know this information for step 6)

Step 3a: Click the Apple Icon in the upper left corner of your desktop and select 'About This Mac'

Iogear Cac Reader Drivers For Mac

Step 3b: Look below Mac OS X for: Example: Version 10.X.X, or 11.X

Step 4: Figure out which CAC (ID Card) you have

(You need to know this information for step 6)

Look at the top back of your ID card for these card types. If you have any version other than the seven shown below, you need to visit an ID card office and have it replaced. All CACs [other than these six] were supposed to be replaced prior to 1 October 2012.

Find out how to flip card over video

Step 5: Install the DoD certificates (for Safari and Chrome Users)

Go to Keychain Access

Click: Go (top of screen), Utilities, double click Keychain Access.app

(You can also type: keychain access using Spotlight (this is my preferred method))

Select login (under Keychains),and All Items (under Category).

Download the 5 files via links below (you may need to <ctrl> click, select Download Linked File As... on each link) Save to your downloads folder

Please know... IF You have any DoD certificates already located in your keychain access, you will need to delete them prior to running the AllCerts.p7b file below.

https://militarycac.com/maccerts/AllCerts.p7b,

https://militarycac.com/maccerts/RootCert2.cer,

https://militarycac.com/maccerts/RootCert3.cer,

https://militarycac.com/maccerts/RootCert4.cer, and

Double click each of the files to install certificates into the login section of keychain

Select the Kind column, verify the arrow is pointing up, scroll down to certificate, look for all of the following certificates:

DOD EMAIL CA-33 through DOD EMAIL CA-34,

DOD EMAIL CA-39 through DOD EMAIL CA-44,

DOD EMAIL CA-49 through DOD EMAIL CA-52,

DOD EMAIL CA-59,

DOD ID CA-33 through DOD ID CA-34,

DOD ID CA-39 through DOD ID CA-44,

DOD ID CA-49 through DOD ID CA-52,

DOD ID CA-59

DOD ID SW CA-35 through DOD ID SW CA-38,

DOD ID SW CA-45 through DOD ID SW CA-48,

DoD Root CA 2 through DoD Root CA 5,

DOD SW CA-53 through DOD SW CA-58, and

DOD SW CA-60 through DOD SW CA-61

NOTE: If you are missing any of the above certificates, you have 2 choices,

1. Delete all of them, and re-run the 5 files above, or

2. Download the allcerts.zip file and install each of the certificates you are missing individually.

Errors:

Error 100001 Solution

Error 100013 Solution

You may notice some of the certificates will have a red circle with a white X . This means your computer does not trust those certificates

You need to manually trust the DoD Root CA 2, 3, 4, & 5 certificates

Double click each of the DoD Root CA certificates, select the triangle next to Trust, in the When using this certificate: select Always Trust, repeat until all 4 do not have the red circle with a white X.

You may be prompted to enter computer password when you close the window

Once you select Always Trust, your icon will have a light blue circle with a white + on it.

The 'bad certs' that have caused problems for Windows users may show up in the keychain access section on some Macs. These need to be deleted / moved to trash.

The DoD Root CA 2 & 3 you are removing has a light blue frame, leave the yellow frame version. The icons may or may not have a red circle with the white x

or	DoD Interoperability Root CA 1 or CA 2	certificate
DoD Root CA 2 or 3 (light blue frame ONLY)	certificate
or	Federal Bridge CA 2016 or 2013	certificate
or	Federal Common Policy CA	certificate
or	or	SHA-1 Federal Root CA G2	certificate
or	US DoD CCEB Interoperability Root CA 1	certificate

If you have tried accessing CAC enabled sites prior to following these instructions, please go through this page before proceeding

Clearing the keychain (opens a new page)

Please come back to this page to continue installation instructions.

Step 5a: DoD certificate installation instructions for Firefox users

NOTE: Firefox will not work on Catalina (10.15.x), or last 4 versions of Mac OS if using the native Apple smartcard ability

Download AllCerts.zip, [remember where you save it].

double click the allcerts.zip file (it'll automatically extract into a new folder)

Option 1 to install the certificates (semi automated):

From inside the AllCerts extracted folder, select all of the certificates

<control> click (or Right click) the selected certificates, select Open With, Other...

In the Enable (selection box), change to All Applications

Select Firefox, then Open

You will see several dozen browser tabs open up, let it open as many as it wants..

You will eventually start seeing either of the 2 messages shown next

If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

'Alert This certificate is already installed as a certificate authority.' Click OK

Once you've added all of the certificates...
• Click Firefox (word) (upper left of your screen)
• Preferences
• Advanced (tab)
• Press Network under the Advanced Tab
• In the Cached Web Content section, click Clear Now (button).
• Quit Firefox and restart it

Option 2 to install the certificates (very tedious manual):

Click Firefox (word) (upper left of your screen)

Preferences

Advanced (tab on left side of screen)

Certificates (tab)

View Certificates (button)

Authorities (tab)

Import (button)

Browse to the DoD certificates (AllCerts) extracted folder you downloaded and extracted above.

Note: You have to do this step for every single certificate

Note2: If the certificate is already in Firefox, a window will pop up stating: 'Alert This certificate is already installed as a certificate authority (CA).' Click OK

Note3: If the certificate is not already in Firefox, a window will pop up stating 'You have been asked to trust a new Certificate Authority (CA).'

Check all three boxes to allow the certificate to: identify websites, identify email users, and identify software developers

Step 6: Decide which CAC enabler you can / want to use

Only for Mac El Capitan (10.11.x or older)

After installing the CAC enabler, restart the computer and go to a CAC enabled website

NOTE: Mac OS Sierra (10.12.x), High Sierra (10.13.x), Mojave (10.14.x), Catalina (10.15.x), and Big Sur (11.1) computers no longer need a CAC Enabler.

Try to access the CAC enabled site you need to access now

Mac support provided by: Michael Danberry

Iogear Cac Reader Mac Installation

Installation Steps

Step 1: Obtain a CAC Reader

Step 2:CAC Reader driver / Video

Step 3:DoD Certificates

Step 4:ActivClient

Step 4a:Update ActivClient

Step 5:IE adjustments/Video

Log into a CAC enabled website now

Page Quick Links:

Firmware Update for SCR-331

Verify SmartCard Service started

Start Smart Card Service PDFs

Updating a CAC Driver

Plug in your CAC reader NOW

NOTE: Please check and make sure your CAC reader installed BEFORE you attempt to follow the driver installation instructions below. Most of the time, the New hardware wizard will install the CAC reader automatically, negating the need for you to install the driver manually.

To Verify whether your driver did or did not install, follow these instructions:

Plug your CAC reader into your computer before proceeding

Windows 10: Right click the Windows logo (lower left corner of your screen). Click System, select Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up. If your smart card reader is listed, go to the next step of installing the DoD certificates.

Windows 8.1: Right click Computer, select Properties, Device Manager link (upper left corner of the screen), scroll down to Smart card readers, select the little triangle next to it to open it up. If your smart card reader is listed, go to the next step of installing the DoD certificates. NOTE: If you don't see it, you can also click Start, In the Start Search line type in: devmgmt.msc. (For Windows 8.1 users, you'll right click Start).

If it did not install correctly... Try this first: Go to Device Manager (Instructions are above), scroll down to Smart Card readers, right click the CAC reader that shows up below Smart Card Readers. It can also show up under unknown devices. Select Uninstall. It will give you a message. Once it is uninstalled, unplug the reader from your computer. Wait a few moments, then plug it back in. It 'should' start to install itself. If that doesn't work, keep reading for other ideas below.

IF you do not see Smart card readers when checking, THEN follow along with the steps below.

To install a driver onto your computer for a CAC reader, you need to first download the correct driver for the hardware you purchased, I have drivers for the most common USB Readers, Keyboard, laptop, & desktop card readers

PROCEED TO STEP 3 ONCE YOU'VE COMPLETED YOUR VERIFICATION OR INSTALLATION

Unzipping - the driver

Windows 10 or 8.1 - Save the zip file to a location of your choosing. Once you have the zip file downloaded, open the zip file (Windows built in zipping program). Copy the folder inside to a new folder. It will unzip the contents, (this is the folder you will need when you are doing the steps below). You can also use the Extract All Files button (on the left under Folder Tasks, under File, Extract All). It will then ask where you want to save the file. I recommend placing a backslash ( ) at the end of the location on the screen.

WinZip- Use the Extract button. It will ask you where you want to save the extracted files to, I recommend your desktop. Click the desktop icon on the left. Push the little yellow folder in the upper right corner of this active window. It will prompt you for a name for the folder (type in CAC Driver). Hit OK, then select Extract (lower right corner of this window). You should now see your new folder on your desktop to open up. Keep this for a later step.

Updating the Driver - Example is for an SCR-331

Windows 10 & 8.1 - Right Click Computer, Select Properties

Click the Device Manager link (on the left side of your screen)

Select the triangle next to Smart Card Readers

Right click the SCRx31 USB Reader, select Update Driver software

Browse my computer... Select Browse, then desktop (or wherever you made the folder)

NOTE: One person had to select 'Search automatically for updated driver software' (This is very rare)

Select the folder (if using the firmware update driver below, stop at the driver folder, do not 'dig' down to AND or Intel folders) and then OK. Next

Your driver will be installed.

FIRMWARE UPDATE for SCR-331 Reader

(Requires a physical Windows computer, Mac using Bootcamp, or TENS / LPS (see next sentence below). It will NOT work in virtual Windows (examples: VMware, Parallels, or Virtual box)).

Verify your firmware version before going through this process...

1. Go to Device Manager, type: device manager in the search box

2. Select the arrow next to Smart card readers

3. Right click on SCR33x USB Smart Card reader

4. Select Properties

5. Select Details (tab)

6. Select Hardware Ids

7. The number after &REV_ is your current firmware, if it is0525there is no need to update the firmware.

Intel based Macs can update the firmware using TENS / LPS (instructions on top of PDF page 37 (document page 34)) Video instructions

Iogear Cac Reader Driver For Mac

The firmware update 'should' fix the following problems:

A. Card reader is not recognized

B. Shows up as 'STCII Smart Card Reader'

C. Shows up as 'USB Smart Card Reader' (not necessarily a problem)

D. Does not read your 'Gemalto TOP DL GX4 144', 'Oberthur ID One 128 v5.5 Dual' CAC.

E. Does not read your CAC when using your Mac

NOTE: We are hearing Mac users having problems with the SCR-331 reader. A recommendation is to get a Mac compatible reader.

Iogear Cac Reader Mac

Installation Instructions:

1. Download update file

2. Unzip the downloaded file (by Right-clicking and selecting Extract All)

3. Update the driver present in the 'driver' folder (by following guidance above)

4. Once the driver is updated, Run FWUPDATE.EXE (lightning bolt) in the 'app' folder to update the firmware. Select the default choices.

5. Close all programs, restart your computer

NOTE: If you computer fails to recognize the CAC reader driver, you may need to try a different computer to do the update.

Now your SCR-331 reader can be used with Windows 10 & 8.1, or Mac.

FIRMWARE UPDATE for SCR-3310 reader

(V1 ONLY (doesn't have V2 after SCR-3310 on the label))

(Requires a physical Windows computer, Mac using Bootcamp, or TENS / LPS (see next sentence below). It will NOT work in virtual Windows (examples: VMware, Parallels, or Virtual box)).

Intel based Macs can update the firmware using TENS / LPS (instructions on PDF page 37 (document page 34)) Video instructions

NOTE: DO NOT use this update on a V2 reader. There is no firmware update for a V2 reader because it is already updated.

Click on FWUpdate.exe, this will update your firmware to version 5.26

CHECK SERVICES to make sure Smart Card is running

(This Video shows a very basic version on how to start the service (start at 44 seconds))

If your CAC reader is still not seen by ActivClient, make sure that the Smart Card service is running.

Here's how: Go to: Start, Search programs and files (in Windows 10 & 8.1), type: Services.msc Scroll down to Smart card, double click it and set it to automatic and click Start

Iogear Cac Reader Mac Drivers

If you are unable to start the service; It doesn't show up; ActivClient still says no reader attached; or it acknowledges you have a CAC in the reader (but you can't access it) follow these registry edits below.

Iogear Cac Reader For Mac

Windows 10 & 8.1

Automated method (double click the .reg file inside the .zip folder)

Manual method for Windows 10 & 8.1, (mirror your registry settings to the PDF links below).

Anytime you make changes to the Registry it is a recommended you back it up first

If ActivClient still does not see the CAC reader, try these ideas (if they don't work, your only other option is reloading Windows onto your computer).